B-2 Cyber Security Engineering SME 

Job description

The Applicant shall provide IA and technical expertise for information systems, systems engineering, STE, legacy operating systems, laboratory equipment, and avionics systems/sub-systems-related modernization and sustainment programs supported in the B-2.

Essential Job Functions:

The Applicant shall be the IA security official responsible to support in coordinating and obtaining security approval for sanitization and secure handling procedures for avionics line replaceable units and STE driven by sustainment and modification programs.

The Applicant shall apply in-depth knowledge of various computer and electronic systems, from Windows and UNIX-flavored operating systems to avionics and test equipment hardware.

The Applicant shall advise and assist with implementation of DoDI 5205.11 and Department of Defense Manuals (DoDM) 5205.07, Volume 1-4 as well as JSIG regulations for SAP IA oversight and management of computer and avionics equipment.

The Applicant shall assist with IA security oversight and approval of modernization program equipment directly tied to software integration, operations and implementation schedules for new capabilities for the warfighter. All of these capabilities directly affect the maintenance and improvement of aircraft availability.

The Applicant shall support development and approval processes for PPPs, AT plans, ATO requests, and other milestone decision and design documentation reviews as required.

Required Skills:

Bachelor’s degree in engineering, mathematics or science related to cybersecurity plus 15 years of experience or a Master’s degree plus 12 years is required.

Requires an active TS/SCI security clearance

Applicant should meet all prerequisites necessary to enable the Government to grant a DoDI 8570 baseline certification commensurate with the position description and tasking responsibilities.

AVIONICS AND RF ELECTRICAL ENGINEER

Must have an Active Top Secret clearance. Hybrid role.

Job description

In this role you will provide full-spectrum Avionics and RF Communications Electrical Engineering support to Ground Communication System and Systems Engineer to the Program Office.

Essential Job Functions:

The applicant shall advise and assist the Government in performing electrical and avionics engineering program functions to include the development, test, deficiency, and modification assessments of division program systems (to include air vehicle, ground segment, payloads, and associated support equipment) with emphasis on the integration / interoperability in the areas of avionics, network engineering, communications engineering, sensor engineering, ISR enterprise engineering and systems architecture engineering.

    • The applicant shall utilize knowledge of various technical areas of current network architectures (physical, link, transport, applications layers), of the Global Information Grid (GIG) and AFDCGS Wide Area Network (WAN) implementation designs, DoD Information Assurance (IA) requirements relative to networking, layered protection methods against cyber warfare, and knowledge of quality of service issues for data transport via long haul networks to ensure operability requirements are met for providing the required ISR enterprise data exchange.
  • The applicant shall use knowledge to create new systems architectures, interface specifications, interface testing, creating net-ready and net-centric capabilities, and generate DoD Architecture Framework products to ensure operability requirements are met for providing the required ISR enterprise data exchange.
  • The applicant shall review and analyze interoperability requirements and shall review, develop and evaluate resultant specifications and internal and external ICDs.
  • The applicant shall support regular information exchanges between stakeholders and external users in the system architectures to resolve interoperability issues.
  • The applicant shall support system security certification and accreditation activities and airworthiness certification activities as they pertain to interoperability issues.
  • The applicant shall plan and prepare contract documents and support the Government in weapon system contract related to new ground segment capabilities and air vehicle interfaces on ISR and SOF systems.

Required Skills:

  • Possess a Bachelor of Science (BS) degree, or higher, in a professional Engineering discipline from an American Board for Engineering and Technology (ABET) accredited educational program and a minimum of 15 years of engineering experience in a relevant functional area with a minimum of 8 of those years working in the specialty task area for the DoD.
  • An adjudicated DoD Security clearance on the first day of employment.
  • Must have a Top Secret/SCI and NATO endorsements.
  • Personnel at the Senior level shall possess the advanced knowledge, experience and recognized ability to be considered an expert in their technical/professional field and possess the ability to perform tasks and oversee the efforts of junior and journeyman personnel within the technical/professional discipline.

Desired Skills:

  • Navigation software experience.

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant’s race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Please note that specific programs and options available to an employee may depend on eligibility factors.

CHIEF SYSTEMS ENGINEER (SEMICONDUCTOR)- TS/SCI W/POLY

Job Description:
As a Chief Systems Engineer – Intel & Cyber you will work to expand our in-house semiconductor research and development efforts and capabilities. This role will allow you shape the process development, sustainment, and improvement of semiconductor processing. This opportunity is at the core of a new technology area and the company is looking for innovative researchers and operators to develop, grow, and transition from lab development to a high-volume production environment.

Essential Functions:
• Manage technical subject matter experts through regular interactions, development of technical documentation and coordinating design review activities.
• Generate and review Subcontractor statements of work and requirements.
• Assist with the development of top-level specification and manage requirement flow down to lower-level specifications.
• Manage technical risks and opportunities with internal and external customers; work with technical team to identify, mitigate and close program risks.
• Ability to lead teams in the role of Chief Systems Engineer (CSE) from development through production.
• Ability to interface with Customer organization to drive understanding, agreement, closure though formal documentation of the technical baseline.
• Own the technical baseline and drive execution of the program.

Qualifications:
• Bachelor’s Degree and minimum 9 years of prior relevant experience. Graduate Degree and a minimum of 7 years of prior related experience.
• Current TS/SCI Security Clearance or above; US Citizenship required.
• 5+ years of Systems Engineering experience on development programs including requirements derivation and risk management.
• Experience with subcontractor statements of work (SOW) and requirements generation

Preferred Additional Skills:
• Active TS/SCI with FS Poly
• 5+ Years Chief Systems Engineer experience on large development and manufacturing programs
• 5+ years of Semiconductor Fabrication Clean Room Experience
• Demonstrated experience with Model Based Systems Engineering
• Experience with DOORS, Jama, or equivalent requirements management software

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant’s race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Please note that specific programs and options available to an employee may depend on eligibility factors.

SR SPEC, ELECTRICAL ENGINEER (FPGA) HYBRID role

Job Description:
Our client is seeking Senior Specialist FPGA Firmware Engineer who will participate in FPGA firmware development activities. It will support digital design / FPGA design & verification. The position supports new product development and sustainment current product lines, which include avionics Surveillance, Recorders and Display products. The position will support technical leadership in decision-making process for the product, enabling the team to make decisions in a rapid and successful manner. The engineer is responsible for engaging other engineering participants with discipline specific backgrounds to resolve issues and provide a unified engineering response. The individual will provide expertise in technical, schedule and cost targets.

Essential Functions:
• Digital design / FPGA design and verification
• Device migration across FPGA manufacturers;
• Generation of schematics and review of PWA designs
• Generation of requirements, FPGA coding in various industry tools, FPGA verification and traceability mapping
• Work within established FPGA processes and checklists, which are consistent and support estimation activities associated with new and remapping FPGA design efforts.
• Lead Root Cause Failure Investigations of digital designs
• Experience designing or troubleshooting high reliability electronics.
• Good understanding of product development lifecycle processes
• Experience with test equipment and tools including multimeter, oscilloscopes, logic analyzer.

Qualifications:
Bachelor’s Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience.

Preferred Additional Skills:
• Architecting, implementing high throughput digital cores / algorithms targeting SOC class FPGAs with interfaces – Ethernet (UDP, TCP/IP), AXI, PCIe/NVMe, USB
• Experience with Clock Domain Crossing, Reset Domain Crossing, Static Formal flows.
• Experienced with resolving complex FPGA issues.
• Experience in VHDL/Verilog, bonus if experienced with C++ (OOP), Perl/Tcl, Python
• Experience with Synthesis/PAR: SDC, Synopsys DC/Synplify, Vivado, Quartus, Libero
• Verification with UVM, Verification IPs. Mentor EDA preferred.
• Tool simulators; Aldec & ModelSim
• Ability to support geographically dispersed teams, including through travel.
• support RTCA DO-254 design assurance guidance for airborne electronic hardware
• Knowledge of engineering design standards for commercial aviation industry
• Experience in packaging of high reliability electronics (aerospace, medical, automotive, or equivalent)

This position requires the employee to work mostly onsite – with flexibility or hybrid schedule 2 days work from home per week. We also work a 9/80 schedule, which allows us to be off every other Friday.

We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant’s race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Please note that specific programs and options available to an employee may depend on eligibility factors.

SENIOR ELECTRICAL ENGINEER – COMSEC HARDWARE

The company is seeking a versatile embedded COMSEC/Information Assurance hardware engineer to join our talented team supporting the design and manufacturing of our Space and RF products. As a hardware engineer, you will be directly involved in the design, integration, and test of secure mesh network satellite communication links, digital telemetry, signal processing, and encryption technology. The successful candidate will perform design and architecture engineering functions with an emphasis in COMSEC and crypto processor designs. In this capacity the candidate will support the space communication and encryption product line in development efforts for programs and IRAD projects.

Essential Functions:
• Hardware design of satellite communications systems, with an emphasis on COMSEC and RF designs
• Assist with the capture of next generation communications security business opportunities including development of concept whitepapers, technical solution conceptualization and proposal support.
• Coordinate with system and design teams to ensure architecture meets intended requirements.
• Prepare and present technical data at internal and customer reviews.

Qualifications:
• Bachelor’s degree in Electrical Engineering or equivalent required and 6+ years of industry experience or a Master’s degree in Electrical Engineering or equivalent and 4+ years of industry experience
• Detailed understanding of analog/digital circuit design, including high speed digital interfaces or digital design for FPGAs and embedded processors
• Experience with following hardware design processes and generating required documentation.
• Experience in RF Communications waveforms and propagation
• Experience with IP/UDP packet protocols and mesh network routing
• Active Secret Security Clearance required / Active TS/SCI Clearance.

Preferred Additional Skills:
• Experience designing and implementing government and commercial cryptographic functions in hardware.
• Knowledge of isolation requirements and implementation within the analog, digital, RF and power operating boundaries within subsystems.
• Knowledge of NSA certification requirements and processes. NSA training in Module Embedment, TEMPEST testing/certification or other security professional training/certifications.
• Experience with HyperLynx, SIPro or similar signal integrity design tools
• Experience using schematic design tools, VHDL and firmware simulation tools.
• Experience with standard lab equipment, including oscilloscopes, logic analyzers, signal generators, and signal analyzers.
• Proven experience designing high reliability circuitry for space environments.
• Knowledgeable in HAIPE and KMI 3300 CMS packet exchange between ground and spaceborne nodes
• Experience with MATLAB and synthesized code tools.
• Wired and Wireless secure networking

In compliance with pay transparency requirements, the salary range for this role is $110,500.00 – $180,00.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. The company also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. Security Clearance Required: No Visa Candidate Considered: No Willingness to Travel – Occasionally

Ground System and Communication System Engineer Hybrid

Essential Job Functions:

The applicant shall assist the Government to perform engineering program execution functions to include the development, test, deficiency, and modification assessments of division program systems (to include air vehicle, ground segment, payloads, and associated support equipment) with emphasis on the interoperability in the areas of network engineering, communications engineering, sensor engineering, ISR enterprise engineering and systems architecture engineering.

The applicant shall utilize knowledge of various technical areas of current network architectures (physical, link, transport, applications layers), of the Global Information Grid (GIG) and AFDCGS Wide Area Network (WAN) implementation designs, DoD Information Assurance (IA) requirements relative to networking, layered protection methods against cyber warfare, and knowledge of quality of service issues for data transport via long haul networks to ensure operability requirements are met for providing the required ISR enterprise data exchange.

The applicant shall use knowledge to create new systems architectures, interface specifications, interface testing, creating net-ready and net-centric capabilities, and generate DoD Architecture Framework products to ensure operability requirements are met for providing the required ISR enterprise data exchange.

The applicant shall review and analyze interoperability requirements and shall review, develop and evaluate resultant specifications and internal and external ICDs. The applicant shall support regular information exchanges between stakeholders and external users in the system architectures to resolve interoperability issues.

The applicant shall support system security certification and accreditation activities and airworthiness certification activities as they pertain to interoperability issues. The applicant shall plan and prepare contract documents and support the Government in weapon system contract related to new ground segment capabilities and air vehicle interfaces on ISR and SOF systems.

Required Skills:
Possess a Bachelor of Science (BS) degree, or higher, in a professional Engineering discipline from an American Board for Engineering and Technology (ABET) accredited educational program and a minimum of 15 years of engineering experience in a relevant functional area with a minimum of 8 of those years working in the specialty task area for the DoD.

An adjudicated DoD Security clearance on the First Day of employment. Must have a Top Secret/SCI and NATO endorsements. Personnel at the Senior and Subject Matter Expert (SME) level shall possess the advanced knowledge, experience and recognized ability to be considered an expert in their technical/professional field, and possess the ability to perform tasks and oversee the efforts of junior and journeyman personnel within the technical/professional discipline.

SPECIALIST, SYSTEMS ENGINEER (TS/SCI)

Job Description:

Our company is currently seeking Electronic Warfare Systems Engineers to join our team. Team will define requirements in the Electromagnetic Spectrum to satisfy program goals. Determine Remote Operations capabilities and specify implementation, via Space Control, to support Mission goals. Assist in defining Automated Testing capabilities for verifying requirement implementation.

We have a long history of innovative and exceptional performance; we have earned our place as a trusted provider to our customers. In this position, you will bring your systems engineering background to a system engineering role where you can make a broad impact to programs and projects that are critical to our customers

Essential Functions:

Performing hardware/software requirements definition, decomposition, allocation, management, verification, and validation
System specification development, creation and enforcement of interface control documents, system risk management, and system configuration management
Responsibility for verifying all requirements are met using the approved verification method and documenting the verification results
Perform technical planning, system integration, and verification and validation
Contribute to the development of new principles and concepts to enhance mission operations
Support the development of technological concepts which improve system performance and mission capabilities

Qualifications:

Bachelor’s Degree and minimum 4 years of prior relevant experience or 2 years post-Secondary/ Associates Degree and a minimum of 8 years of prior related experience. Graduate Degree and a minimum of 2 years of prior related experience.
Active or recently active TS/SCI.
Bachelor’s degree in an Science, Technology, Engineering or Math related field. Experience with Electromagnetic Spectrum
Experience with Integration and System Verification and Test
Experience with MBSE tools e.g., MagicDraw, Cameo or similar.

Preferred Additional Skills:

Experience with command-and-control system operational CONOPS
Experience with Model-Based Systems Engineering (MBSE)
Experience with DOORS or similar requirements management tool.
Experience in Continuous integration and or Agile Development techniques
Strong leadership and communication skill

Security Clearance IT

AFSIM Modeling and Simulation Specialist (MS&A)

Our client is seeking an AFSIM MS&A candidate to support a high visibility team who create agile technology solutions across the DoD, Aerospace, Human Factors, and Security markets. As a AFSIM MS&A you will be challenged everyday by supporting a World Class R&D who assist in solving national security problems.

• The team works with state of the art simulation technologies
• The team speaks with simulation integration experts and Military SME.
• The team conducts capability assessments for emerging miliary technologies
• The team provides suitable and related tools and methodologies to inform DoD decision makers.

Essential AFSIM Job Functions:
• Construct military models and entities of varying complexity
• Provide dynamic scripting techniques to produce modeled entity actions/interactions.
• Create and enhance operationally relevant scenarios that accurately represent actions, reactions, and interactions between entities in the AFSIM simulation.
• Contribute to the development and execution of MS&A and conducted study plans
• Collaborate with SMEs to identify requirements for system implementation
• Coordinate with team members to contribute to execution of analysis of studies, analyze results, and prepare and present study findings.
• Collaborate with agile software development teams to build and enhance MS&A solutions.
• Collaborate with study leads and customer stakeholders to identify study requirements and develop relevant technical approaches.

Requirements:
• BS degree (engineering, science, mathematics) prefer MS in engineering, science, mathematics, or related technical discipline.
• Hands-on experience creating scenarios and models for engagement and/or mission level studies.
• Ability to apply the scientific method to diverse MS&A efforts.
• Scripting or programming experience required; and with preferably all or any of the following: STK, JMP, Python, C++, or R.
• Ability to travel, as required.
• Familiarity with modern military systems, both foreign and domestic.

This position requires an active security clearance, Top Secret/SCI or higher.

SENIOR DIRECTOR OF IDENTITY AND SECURITY

Our client is looking for a PM leader with experience in building large-scale consumer or enterprise identity and security products. As a Senior Leader, you will lead a team of PMs responsible for securing our login and registration flows while keeping abuse in check.

Responsibilities:

  • Manage and scale a team of steller PMs with a mission to secure our login and registration flows at a global scale
  • Be the face for the identity platforms team and externally at industry events and alliances
  • Define the north star vision for the identity security team and guide the team by building and executing roadmaps that help us achieve that vision
  • Provide guidance and leadership to assist cross functional teams in experimentation, making decisions and successfully launching features
  • Partner with engineering, design and other cross functional teams to develop identity product features in an agile manner
  • Partner with our CISO and the security team to develop advanced features to detect and manage abuse

Minimum Qualifications:

  • 10+ years of Security and Identity platforms experience; 3+ years of people management experience
  • Proven track record of successfully building, maintaining and securing identity product stacks
  • Experience in building and scaling platform teams
  • Solid understanding of identity and security standards

Malware Prevention Reverse Engineer – Cyber Security Defense

Job description
The Cyber Security Defense (CSD) function within Global Information Security is responsible for all aspects of threat intelligence and monitoring, application and network security, and insider threat.
The Malware Prevention Team’s aim is to reduce risk across our client’s by using existing or establishing robust cyber-hacking and malicious code containment activities for the security, safeguarding, continuity and confidentiality of information of our client They are looking for an advanced-level analyst that has experience with threat actor tracking, malware analysis, and reverse engineering of malware. They will be part of a Malware Prevention sub-team team that focuses on malware research and analysis.

Responsibilities include, but are not limited to:
• In-depth analysis of malware, including authoring analysis reports.
• Tracking malware campaigns, malicious actors, and related infrastructure.
• Creation of tools and scripts to assist in the analysis of malware analysis.
• Field escalations of potentially malicious files and websites from teams within Malware Prevention.

Required Skills:

  • Strong direct experience of analyzing malware
  • Intermediate to advanced malware analysis skills
  • Intermediate to advanced experience reverse engineering tools such as IDA Pro, x64dgb, OllyDbg, Immunity Debugger and/or Ghidra
  • Intermediate to advanced experience reverse engineering malware code written in C, C++, VisualBasic, Java, .NET, Delphi, JavaScript, and VBScript.
  • Solid background in C++ programming and Win32 API’s
  • Experience creating malware analysis tools and scripts for use in tasks such accelerating malware analysis, unpacking malware, and extracting data (ex – configuration extraction)
  • Experience building and maintain scripts to emulate malware and parse c2 response traffic is a plus
  • Experience in encryption/obfuscation and how to reverse it is desired
  • Can create innovative ways to track progression of malware families, infrastructure and campaigns conducted by ecrime, and cyber espionage actors
  • Experience with penetration testing and/or adversary emulation is a plus.
  • Background in network traffic analysis.
  • Knowledge of networking protocols: TCP/IP, HTTP/HTTPs, FTP, IRC etc
  • GCIH, GREM, GCFA or CISSP is desired, but not required
  • Able to work independently on tasks, but also work well within a team environment